Admission to engineering standing in a degree program is necessary in order to continue in upper level courses and to be granted a baccalaureate degree in engineering or computer science. There are specific departmental requirements for admission to engineering standing and engineering standing applies to a specific program. Hence, receiving engineering standing in one program does not grant engineering standing in another. Please refer to the “College of Engineering” section in the UK Bulletin of the year you entered the College of Engineering for more information. Full Name * UK ID Number * Official UK Email Address * Major * - Select -Aerospace EngineeringBiomedical EngineeringBiosystems EngineeringChemical EngineeringChemical Engineering - PADUCAHCivil EngineeringComputer EngineeringComputer ScienceElectrical EngineeringMaterials EngineeringMechanical EngineeringMechanical Engineering - PADUCAHMining EngineeringPlease select the major in which you are applying for engineering standing. Academic Advisor – Aerospace Engineering - None -Jennifer EllisMichelle MosseyThomas SuggsPlease select your academic advisor. Specific Requirements for Admission to Engineering Standing in Aerospace Engineering A cumulative UK GPA of at least 2.5 and successful completion of all pre-major courses. Successful completion of the following courses with at least a 2.5 GPA: CHE 105, CIS/WRD 111, EGR 101, EGR 102, EGR 103 (or EGR 215 in lieu of EGR 101 and EGR 103), EM 221, MA 113, MA 114, MA 213, PHY 231, PHY 241, PHY 232, and PHY 242 and a C or better in each course. If a course is repeated, the best grade will be used for calculation of GPA in the above listed courses. Academic Advisor – Biomedical Engineering - None -Jessica RipleyPlease select your academic advisor. Specific Requirements for Admission to Engineering Standing in Biomedical Engineering* A cumulative UK GPA of at least 2.5 and successful completion of the following courses with at least a 2.5 GPA: BIO 148, BIO 152, BME 201, CHE 105, CIS/WRD 110, CIS/WRD 111, EGR 101, EGR 102, EGR 103, MA 113, MA 114, MA 213, PHY 231, PHY 241, PHY 232 and PHY 242. If the course is repeated, the best grade will be used for calculation of GPA in the above listed courses. *Specific requirements may vary depending on the year you entered the College of Engineering. Please check with your academic advisor should you have questions. Academic Advisor – Biosystems Engineering - None -Alicia ModenbachJoseph DvorakPlease select your academic advisor. Specific Requirements for Admission to Engineering Standing in Biosystems Engineering* A cumulative UK GPA of at least 2.5 and successful completion of all pre-major courses. Successful completion of the following courses with at least a 2.5 GPA: CHE 105, CIS/WRD 110, MA 113, MA 114, MA 213, and PHY 231. Completion of BAE 200 with a grade of C or better. If a course is repeated, the best grade will be used for calculation of GPA in the above listed courses. *Specific requirements may vary depending on the year you entered the College of Engineering. Please check with your academic advisor should you have questions. Academic Advisor – Chemical Engineering - None -Bruce ColeMarlene SpurlockPlease select your academic advisor. Academic Advisor – Chemical Engineering - Paducah * - Select -Jennifer McIntoshPlease select your academic advisor. Specific Requirements for Admission to Engineering Standing in Chemical Engineering* A cumulative UK GPA of at least a 2.5 and successful completion of all pre-major courses. Successful completion of the following pre-major courses with at least a 2.5 GPA: CHE 105, CHE 107, CHE 111, CHE 113, CIS/WRD 110, MA 113, MA 114, MA 213 and PHY 231. Completion of CME 200 with a grade of C or better. If a course is repeated, the best grade will be used for calculation of GPA in the above listed courses. *Specific requirements may vary depending on the year you entered the College of Engineering. Please check with your academic advisor should you have questions. Academic Advisor – Civil Engineering - None -Dale DavisBillie SirnPlease select your academic advisor. Specific Requirements for Admission to Engineering Standing in Civil Engineering* A cumulative UK GPA of at least a 2.5 and successful completion of all pre-major courses. Successful completion of the following pre-major courses with at least a 2.5 GPA: CE 106, CE 211, CHE 105, CHE 107, CIS/WRD 110, EGR 103, EM 221, MA 113, MA 114, MA 213, PHY 231 and PHY 241 and a C or better in each course. If a course is repeated, the best grade will be used for calculation of GPA in the above listed courses. *Specific requirements may vary depending on the year you entered the College of Engineering. Please check with your academic advisor should you have questions. Academic Advisor – Computer Engineering - None -Will AaronDanielle Green-HinklePlease select your academic advisor. Specific Requirements for Admission to Engineering Standing in Computer Engineering* A cumulative UK GPA of at least a 2.5 and successful completion of all pre-major courses. Successful completion of the following pre-major courses with at least a 2.5 GPA: CHE 105, CIS/WRD 110, CS 215, CS 216, EE/CPE 282 and PHY 231. If a course is repeated, the best grade will be used for calculation of GPA in the above listed courses. *Specific requirements may vary depending on the year you entered the College of Engineering. Please check with your academic advisor should you have questions. Academic Advisor – Computer Science - None -Kathy Ice-WeddingStephen HicksPlease select your academic advisor. Specific Requirements for Admission to Engineering Standing in Computer Science* A cumulative UK GPA of at least a 2.5 and successful completion of all pre-major courses. Successful completion of the following pre-major courses with at least a 2.5 GPA: CS 215, CS 216, CS 275 and MA 114. If a course is repeated, the best grade will be used for calculation of GPA in the above listed courses. *Specific requirements may vary depending on the year you entered the College of Engineering. Please check with your academic advisor should you have questions. Academic Advisor – Electrical Engineering - None -Will AaronDanielle Green-HinklePlease select your academic advisor. Specific Requirements for Admission to Engineering Standing in Electrical Engineering* A cumulative UK GPA of at least a 2.5 and successful completion of all pre-major courses. Successful completion of the following pre-major courses with at least a 2.5 GPA: CHE 105, CIS/WRD 110, CS 215, EE 211, EE/CPE 282 and PHY 231. If a course is repeated, the best grade will be used for calculation of GPA in the above listed courses. *Specific requirements may vary depending on the year you entered the College of Engineering. Please check with your academic advisor should you have questions. Academic Advisor – Materials Engineering - None -Bruce ColePlease select your academic advisor. Specific Requirements for Admission to Engineering Standing in Materials Engineering* A cumulative UK GPA of at least a 2.5 and successful completion of all pre-major courses. Successful completion of the following pre-major courses with at least a 2.5 GPA: CHE 105, CHE 107, CHE 111, CHE 113, CIS/WRD 110, MA 113, MA 114, MA 213, PHY 231 and PHY 241. Completion of MSE 201 with a grade of C or better. If a course is repeated, the best grade will be used for calculation of GPA in the above listed courses. *Specific requirements may vary depending on the year you entered the College of Engineering. Please check with your academic advisor should you have questions. Academic Advisor – Mechanical Engineering - None -Jennifer EllisMichelle MosseyThomas SuggsPlease select your academic advisor. Academic Advisor – Mechanical Engineering - Paducah - None -Jennifer McIntoshPlease select your academic advisor. Specific Requirements for Admission to Engineering Standing in Mechanical Engineering* A cumulative UK GPA of at least a 2.5 and successful completion of all pre-major courses. Successful completion of the following pre-major courses with at least a 2.5 GPA: CHE 105, CIS/WRD 111, EGR 101, EGR 102, EGR 103, EM 221, MA 113, MA 114, MA 213, PHY 231, PHY 241, PHY 232 and PHY 242 and a C or better in each course. If a course is repeated, the best grade will be used for calculation of GPA in the above courses. *Specific requirements may vary depending on the year you entered the College of Engineering. Please check with your academic advisor should you have questions. Academic Advisor – Mining Engineering - None -Lesley BrennerPlease select your academic advisor. Specific Requirements for Admission to Engineering Standing in Mining Engineering* A cumulative UK GPA of at least a 2.5 and successful completion of all pre-major courses. Successful completion of the following pre-major courses with at least a 2.5 GPA: CHE 105, CIS/WRD 110, MA 113, MA 114, MA 213 and PHY 231. If a course is repeated, the best grade will be used for calculation of GPA in the above listed courses. *Specific requirements may vary depending on the year you entered the College of Engineering. Please check with your academic advisor should you have questions. Acknowledgments I have read and understand the college and departmental requirements for admission to engineering standing. At the end of the semester, I expect to have a cumulative UK GPA of a least a 2.5. I have already completed or expect to have completed by the end of the semester all pre-major courses. At the end of the semester, I expect to have met all specific departmental GPA and grade requirements for admission to engineering standing. I acknowledge the statements listed above. * Yes Leave this field blank Submit