Installation instructions:

-  Please install a dotnet framework on the system before installing the KENTRACK application. A copy of the framework installation file is provided on this CD named "dotnetfx.exe".

- The KENTRACK application can be installed by clicking on the file named "KENTRACK.msi".

- This CD also contains two example data files that are generated by the program, you can load these files after installing the application. To load a file, click on the 'File' menu and select 'Open Project'. Browse to the directory where you have copied these files and click ok. This should load all the data. 

Note: 

a) Due to certain programming limitations you will have to perform the following steps after you a load a file.

- Uncheck any asphalt layers that may have been selected and select again after the file has been loaded on the 'Model-Layer' tabpage. 
- The deformation and fatigue parameters need to be entered everytime you load a file on the 'Damage Analysis' tabpage.

b) Please make sure that you copy the data files onto the hard-drive of your computer before opening the files to prevent any unexpected errors.