 |
Index Card Bridge Contest 2007
Objective:
Using the fewest number of index cards possible, build a bridge that can sustain a minimum load of two 1/2-bricks. Materials to be used include 3x5 index cards, a maximum of one box of paper clips, a maximum of one roll of tape, and safety scissors. All materials will be provided. Dimensions of the bridge should be:
- • 10" minimum span length
- • 3" minimum width for decking
- • 12" minimum total length
Rules:
- Bridge must be built on-site, but no time limit will exist.
- There is no limit on the number of cards used, however, heavy penalties are levied for using more than 10 cards.
- Loading will be done 1/2-brick at a time and will be placed at the center of span(s).
- Maximum of three people per team, for safety.
- Supports are to be excluded from the design.
Judging:
The judging will begin at 11:00 a.m. and once all of the completed bridges are tested, the winners will be announced.
- • Twenty (20) points are given for each of the quarter-bricks that the bridge supports.
- • Five (5) points are given for each of the remaining cards that the designer does not use.
- • Ten (10) points are deducted for each additional card that the designer uses. The designer who earns the most points wins. In case of a tie, bridges will be loaded until failure.
Prizes:
First place, Second place, and Third place. You do not need to be present to win.
Contact Information:
If you have questions, conact:
Sponsored by the student section of the American Society of Civil Engineers
|
|