Publications under the Affiliation of Center for Aluminum Technology

  1. Q. Zeng, X. Y. Wen, and T. Zhai, Effect of Precipitates on the Development of P Orientation {011}á566ñ in a Recrystallized Continuous Cast AA 3004 Aluminum Alloy after Cold Rolling,
    Metallurgical and Materials Transactions A, 2009, accepted, in press.
  2. S. K. Das, W. M. Yin, X. Y. Wen, Y. Liu, S. Ningileri, Formability Evaluation of Recycle-Friendly Automotive Aluminum Alloys,SAE International
    Journal of Materials and Manufacturing, 1(1): 503-510 (2008)
  3. Q. Zeng, X. Y. Wen and T. Zhai, Texture evolution rate in continuous cast AA5052 aluminum alloy during single pass hot rolling,
    Materials Science and Engineering A, 476, 290-300(2008).
  4. X.Y. Wen, Z.D. Long, W.M. Yin, T. Zhai, Z. Li and S.K. Das, Texture evolution in continuous casting aluminum alloy AA5052 hot band during biaxial stretching,
    Materials Science and Engineering A, 454-455, 245-251(2007).
  5. J. X. Li, X. Y. Wen, C.-S. Man and T. Zhai, Fatigue of continuous cast AA5754 Al alloy sheet,
    Materials Science and Technology, 23, No. 3, 324-332(2007).
  6. J. Li, Q. Zeng, X. Y. Wen, T. Zhai, Microstructure, texture and mechanical properties of continuous cast AA 5083 aluminium alloy,
    Materials Science and Technology, 23 No. 2, 225-229(2007)
  7. W. B. Lee and X. Y. Wen, A dislocation-based model of forming limit prediction in the biaxial stretching of sheet metals,
    International Journal of Mechanical Science, 48, 134-144(2006).
  8. S. Das and W. Yin (2007, February). Trends in the Global Aluminum Fabrication Industry.
    Journal of Materials
  9. Z. Long, S. Ningileri and J. G. Kaufman (2007). Application of Time-Temperature-Stress Parameters to High Temperature Performance of Aluminum Alloys .
    The Minerals, Metals & Materials Society.
  10. S. Das, J. Green, T Boggess, and S. Ningileri (2007). Recovering Aluminum from Used Beverage Cans.
    Light Metals.
  11. S. Das (2007). Recent Projects of the Sloan Industry Center for a Sustainable Aluminum Industry Promoting Aluminum Recycling.
    Light Metals
  12. S. Das, C. Ungureanu and I.S. Jawahir (2007). Life-cycle Cost Analysis: Aluminum versus Steel in Passenger Cars.
    The Minerals, Metals & Materials Society
  13. S. Das, G. Gaustad, and R. Kirchain (2007). Identifying Scrap Friendly Alloys Using Chance Constrained Modeling.
    Light Metals
  14. S. Das and J. G. Kaufman (2007). Aluminum Alloys for Bridges and Bridge Decks.
    The Minerals, Metals & Materials Society
  15. S. Das and J. G. Kaufman (2007). Recycling Aluminum Aerospace Alloys.
    Light Metals
  16. S. Das (2006). Emerging Trends in Aluminum Recycling.
    Light Metals
  17. X. Y. Wen, Z. D. Long, W. M. Yin, T. Zhai, Z. Lid and S. K. Das (2006). Texture Evolution in Continuous Casting AA5052 Aluminum Alloy Hot Band During Equi-biaxial Stretching.
    Light Metals
  18. S. Das and M. Hughes ( 2006, August). Improving Aluminum Can Recycling Rates: A Six Sigma Study in KY.
    Journal of Materials
  19. S. Das (2006, June). Designing Aluminum Alloys for a Recycle-Friendly World.
    Light Metal
  20. S. Das (2006, May). Emerging Trends in Aluminum Recycling: Reasons and Responses.
    Light Metals
  21. S. Das (2004, May 20). Technical Solutions for the Aluminum Extrusion Industry.
    ET Seminar, Orlando , FL
  22. S. K. Das, W. J. Long III, H. W. Hayden, J. A. Green, and W. H. Hunt Jr. (2004, August). Energy Implications of the Changing World of Aluminum Metal Supply.
    Journal of Materials
  23. X.Y.Wen, T. Zhai, C.H. Xiao, S. Ningileri, Z. Li, W.B. Lee, S. Das (2005). A dislocation- Model of forming limit diagrams of FCC metal sheet with combination of cube and Copper orientations.
    Materials Science and Engineering A. 402. 149-157.
  24. Zhao, Y. M., Liu, W.C. and Morris, J.G. (2004, November). Quantitative analysis of texture evolution of cold-rolled direct-chill-cast and continuous-cast AA5052 and A5182 aluminum alloys during isothermal annealing.
    Metallurgical and Materials Transactions A. 35A.11, 3613-3629A.
  25. Liu, W. C. and Morris, J. G. (2004, August 25). Lattice rotation and stability of 22.5 deg ND rotated cube orientation in cold rolled poly crystalline AA 5182 aluminum alloy. Materials Science and Engineering A. 380.1-2, 147-154.
  26. Wen, W., Liu, W.C. and Morris, J.G. (2004, August 25). The effect of precipitation of Mg 2Al3 and of MnAl6 on texture evolution during isothermal annealing and subsequently on formability of CC AA5182 al alloy.
    Materials Science and Engineering A. 380.1-2, 191-207.
  27. Liu, W.C. and Morris, J.G. (2004, August 25). Lattice rotation and stability of 22.5 deg ND rotated cube orientation in cold rolled poly crystalline AA 5182 aluminum alloy.
    Materials Science and Engineering A. 380.1-2, 147-154.
  28. Wen, W., Liu, W.C. and Morris, J.G. (2004, August 25). The effect of precipitation of Mg2Al3 and of MnAl6 on texture evolution during isothermal annealing and subsequently on formability of CC AA5182 al alloy.
    Materials Science and Engineering A. 380.1-2, 191-207.
  29. Liu, W.C., Zhai, T. and Morris, J.G. (2004, July). Texture evolution of continuous cast and direct chill cast AA 3003 aluminum alloys during cold rolling.
    Scripta Materialia. 51.2, 83-88.
  30. Wen, W. and Morris, J.G. (2004, May 25). The effect of cold rolling and annealing on the serrated yielding phenomenon of AA5182 aluminum alloy.
    Materials Science and Engineering A. 373.1-2, 204-216.
  31. Zhao, Y.M., Wen, W. and Morris, J.G. (2004, May 25). The differences in particle structures and recrystallization behaviors between DC and CC AA5052 aluminum alloys.
    Materials Science and Engineering A. 373.1-2, 167-174.
  32. Liu, W.C. and Morris, J.G. (2004, January). Quantitative analysis of texture evolution in cold-rolled, continuous-cast AA 5xxx-series aluminum alloys.
    Metallurgical And Materials Transactions A. 35A.1, 265-277A.
  33. Liu, W.C. and Morris, J.G. (2003, December 20). Effect of pre-treatment on recrystallization textures of cold rolled CC AA 5182 aluminum alloy.
    Materials Science and Engineering A. 363.1-2., 253-262.
  34. Liu, J.T., Liu, Y.S. and Morris, J.G. (2003, November). Microstructure and texture of aluminum alloys 3105 and 3015 during cold rolling and annealing.
    Materials Science and Technology. 19.11, 1498-1506.
  35. Zhao, Y.M., Liu, W.C. and Morris, J.C. (2003, October). Comparison of texture evolution during cold rolling between direct chill and continuous cast aluminum alloy 5052.
    Materials Science and Technology. 19.10, 1379-1385.
  36. Liu, W.C., Zhai, T. and Morris, J.G. (2003, October). Pittsburgh, PA. Quantitative relationship between texture volume fraction and cold-roll strain in continuous cast AA 5xxx series al alloys.
    Materials Solutions Conference. 153-161.
  37. Li, J.X., Li, J., Wen, X.Y., Man, C.S. and Zhai, T. (2003, October). Pittsburgh, PA. Anisotropy of the fatigue properties in continuous cast AA5754 alloy sheet.
    ASM Conference.
  38. Liu, W.C., Zhai, T. and Morris, J.G. (2003, October). Comparison of recrystallization and recrystallization textures in cold-rolled DC and CC AA 5182 aluminum alloys.
    Materials Science and Engineering A. 358.1-2, 84-93.
  39. Liu, J. and Morris, J.G. (2003, September). Communication: recrystallization textures of continuous cast AA 3015 alloy: development of the P orientation {111}<566>.
    Metallurgical and Materials Transactions A.34A.9, 2029-2032A.
  40. Liu, W.C., Zhai, T., Man, C.S. and Morris, J.G. (2003, September). Quantification of recrystallization texture evolution in cold rolled AA 5182 aluminum alloy.
    Scripta Materialia. 49.6, 539-545.
  41. Liu, J. and Morris, J.G. (2003, September 25). Macro-, micro- and mesotexture evolutions of continuous cast and direct chill cast AA 3105 aluminum alloy during cold rolling.
    Materials Science and Engineering A. 357.1-2, 277-296.
  42. Wen, W. and Morris, J.G. (2003, August 15). An investigation of serrated yielding in 5000 series aluminum alloys.
    Materials Science and Engineering A. 354.1-2, 279-285.
  43. Liu, J. and Morris, J.G. (2003, April). Texture and grain-boundary evolutions of continuous cast and direct chill cast AA 5052 aluminum alloy during cold rolling.
    Metallurgical and Materials Transactions a. 34A.4, 951-966A.
  44. Liu, W.C., Li, Z., Zhai, T., Man, C.S. and Morris, J.G. (2003, March). San Diego, CA. Development of through-thickness texture gradient during continuous cast processing of AA 5052 aluminum alloy.
    Third Symposium on Hot Deformation of Aluminum Alloys III as held at the TMS Annual Meeting. 125-134.
  45. Liu, J., Cheng, X., Zhai, T. and Morris, J.G. (2003, March). San Diego, CA. Recrystallization and texture of AA 5052 alloy during annealing.
    TMS Annual Meeting: Automotive Alloys 2003, Increasing Energy Efficiency in Aluminum, and Universities Servicing Education, Research and Technology Internationally for the Aluminum and Light Metals Industries Symposia. 259-268.
  46. Lui, W. C. and Morris, J.G. (2003). Comparing of the texture evolution in cold rolled DC and SC AA5182 aluminum alloys.
    Materials Science and Engineering A. 339, 153-193.
  47. Wen, X.Y., Zhai, T., Long, Z.D., Xiao, C.H. and Morris, J.G. (2003). San Diego, CA. Evolutions of textures and particles of a continuous cast Al-Mg alloy during hot rolling.
    Hot Deformation of Aluminum Alloys II, ed. Z. Jin et al. 421-431.
  48. Liu, J., Cheng, X., Zhai, T., Morris, J.G. (2003). Microstructure and texture evolution of Continuous cast and direct chill cast AA5052 aluminum alloy during annealing.
    TMS Annual Meeting.
  49. Liu, W.C. and Morris, J.G. (2003). Comparison of the texture evolution in cold rolled DC and SC AA5182 aluminum alloys.
    Materials Science and Engineering, A339, 183-193.
  50. Cheng, X and Morris, J.G. (2002). Tensile anisotropy of strip cast and direct chill cast AA5182 alloy.
    Materials Science and Technology.
  51. Liu, J., Zhai, T., Wen, X., Chen, J., Cheng, X., Liu, W. and Morris, J.G. (2002). Seattle, WA. On the evolution of deformation texture of AA3105 DC and AA3015 SC aluminum alloys during cold rolling.
    Materials Processing Fundamentals-II, TMS. 282.
  52. Cheng, X.M., Das, S.K., Zhai, T., Yu, X.F. and Morris J.G. (2002). Investigation on Mechanical anisotropy of strip cast (SC) aluminum alloy AA5182.
    Materials Science Forum. 396-402, 1103-1108.
  53. Yu, X.F., Zhai, T., Cheng, X.M., Wen, X.Y., Liu, J.T., Liu, W.C., Chen, J. and Morris, J.G. (2002). Microstructure evolution and mechanical anisotropy of strip cast and direct chill cast AA5182 aluminum alloy.
    Materials Science Forum. 396-402, 101-106.
  54. Liu, W.C. and Morris, J.G. (2002). Kinetics of the formation of the B fiber rolling texture In continuous cast AA 5xxx series aluminum alloys.
    Scripta Materialia. 47, 743-748.
  55. Liu, W.C., Wen, X.Y., Zhai, T. and Morris, J.G. (2002). Seattle, WA. Texture evolution in Cold rolled direct chill cast and continues cast AA1100 aluminum alloys.
    Aluminum Sheet and Plate Rolling & Finishing Technology and Applications, ed. Skillingberg, M.H. and Das, S.K., TMS, 211-218.
  56. J. Li, Q. Zeng, X.Y.Wen and T. Zhai (2007). Microstructure, texture and mechanical properties of continuous cast AA 5083 aluminium alloy.
    Materials Science and Technology A23-2,225-228.
  57. J.X. Li, X.Y. Wen, C.S. Man and T. Zhai (2007). Fatigue of continuous cast AA5754 Al alloy sheet. Materials Science and Technology A23-3, 324-332.

Site last updated September 24, 2014 @ 6:33 pm; This content last updated March 18, 2011 @ 12:14 pm