|
|
Center for Aluminum Technology
Publications under the Affiliation
of Center for Aluminum Technology
1.
S. Das and W. Yin (2007, February). Trends in the Global Aluminum
Fabrication Industry.
Journal of Materials
2.
Z. Long, S. Ningileri and J. G. Kaufman (2007). Application
of Time-Temperature-Stress
Parameters
to High Temperature Performance of Aluminum Alloys .
The
Minerals, Metals & Materials Society.
3.
S. Das, J. Green, T Boggess, and S. Ningileri (2007). Recovering
Aluminum from
Used
Beverage Cans. Light Metals.
4.
S. Das (2007). Recent Projects of the Sloan Industry Center
for a
Sustainable
Aluminum Industry Promoting Aluminum Recycling.
Light
Metals
5.
S. Das, C. Ungureanu and I.S. Jawahir (2007). Life-cycle Cost
Analysis :
Aluminum
versus Steel in Passenger Cars.
The
Minerals, Metals & Materials Society
6.
S. Das, G. Gaustad, and R. Kirchain (2007). Identifying Scrap
Friendly Alloys
Using
Chance Constrained Modeling.
Light
Metals
7.
S. Das and J. G. Kaufman (2007). Aluminum Alloys for Bridges
and Bridge Decks.
The Minerals, Metals & Materials Society
8.
S. Das and J. G. Kaufman (2007). Recycling Aluminum Aerospace
Alloys.
Light
Metals
9.
S. Das (2006). Emerging Trends in Aluminum Recycling.
Light
Metals
10.
X. Y. Wen, Z. D. Long, W. M. Yin, T. Zhai, Z. Lid and S. K. Das (2006).
Texture Evolution in
Continuous
Casting AA5052 Aluminum Alloy Hot Band
During
Equi-biaxial Stretching.
Light
Metals
11.
S. Das and M. Hughes ( 2006, August). Improving Aluminum Can
Recycling Rates:
A
Six Sigma Study in KY. Journal of Materials
12.
S. Das (2006, June). Designing Aluminum Alloys for a Recycle-Friendly
World.
Light
Metal
13.
S. Das (2006, May). Emerging Trends in Aluminum Recycling: Reasons
and Responses.
Light
Metals
14.
S. Das (2004, May 20). Technical Solutions for the Aluminum
Extrusion Industry.
ET
Seminar, Orlando , FL
15.
S. K. Das, W. J. Long III, H. W. Hayden, J. A. Green, and W. H. Hunt
Jr. (2004, August).
Energy
Implications of the Changing World of
Aluminum
Metal Supply.
Journal
of Materials
16. X.Y.Wen, T. Zhai, C.H. Xiao, S. Ningileri, Z. Li, W.B. Lee, S. Das (2005). A dislocation-
Model of forming limit diagrams of FCC metal sheet with combination of cube and
Copper orientations. Materials Science and Engineering A. 402. 149-157.
17. Zhao, Y. M., Liu, W.C. and Morris, J.G. (2004, November). Quantitative analysis of texture
evolution of cold-rolled direct-chill-cast and continuous-cast AA5052 and A5182
aluminum alloys during isothermal annealing. Metallurgical and Materials
Transactions A. 35A.11, 3613-3629A.
18. Liu, W. C. and Morris, J. G. (2004, August 25). Lattice rotation and stability of 22.5 deg
ND rotated cube orientation in cold rolled poly crystalline AA 5182 aluminum alloy.
Materials Science and Engineering A. 380.1-2, 147-154.
19. Wen, W., Liu, W.C. and Morris, J.G. (2004, August 25). The effect of precipitation of
Mg 2Al3 and of MnAl6 on texture evolution during isothermal annealing and
subsequently on formability of CC AA5182 al alloy. Materials Science and
Engineering A. 380.1-2, 191-207.
20. Liu, W.C. and Morris, J.G. (2004, August 25). Lattice rotation and stability of 22.5 deg
ND rotated cube orientation in cold rolled poly crystalline AA 5182 aluminum
alloy. Materials Science and Engineering A. 380.1-2, 147-154.
21. Wen, W., Liu, W.C. and Morris, J.G. (2004, August 25). The effect of precipitation of
Mg2Al3 and of MnAl6 on texture evolution during isothermal annealing and
subsequently on formability of CC AA5182 al alloy. Materials Science and
Engineering A. 380.1-2, 191-207.
22. Liu, W.C., Zhai, T. and Morris, J.G. (2004, July). Texture evolution of continuous cast
and direct chill cast AA 3003 aluminum alloys during cold rolling. Scripta
Materialia. 51.2, 83-88.
23. Wen, W. and Morris, J.G. (2004, May 25). The effect of cold rolling and annealing on
the serrated yielding phenomenon of AA5182 aluminum alloy. Materials Science
and Engineering A. 373.1-2, 204-216.
24. Zhao, Y.M., Wen, W. and Morris, J.G. (2004, May 25). The differences in particle
structures and recrystallization behaviors between DC and CC AA5052 aluminum
alloys. Materials Science and Engineering A. 373.1-2, 167-174.
25. Liu, W.C. and Morris, J.G. (2004, January). Quantitative analysis of texture evolution
in cold-rolled, continuous-cast AA 5xxx-series aluminum alloys. Metallurgical
And Materials Transactions A. 35A.1, 265-277A.
26. Liu, W.C. and Morris, J.G. (2003, December 20). Effect of pre-treatment on
recrystallization textures of cold rolled CC AA 5182 aluminum alloy. Materials
Science and Engineering A. 363.1-2., 253-262.
27. Liu, J.T., Liu, Y.S. and Morris, J.G. (2003, November). Microstructure and texture of
aluminum alloys 3105 and 3015 during cold rolling and annealing. Materials
Science and Technology. 19.11, 1498-1506.
28. Zhao, Y.M., Liu, W.C. and Morris, J.C. (2003, October). Comparison of texture evolution
during cold rolling between direct chill and continuous cast aluminum alloy
5052. Materials Science and Technology. 19.10, 1379-1385.
29. Liu, W.C., Zhai, T. and Morris, J.G. (2003, October). Pittsburgh, PA. Quantitative
relationship between texture volume fraction and cold-roll strain in continuous
cast AA 5xxx series al alloys. Materials Solutions Conference. 153-161.
30. Li, J.X., Li, J., Wen, X.Y., Man, C.S. and Zhai, T. (2003, October). Pittsburgh, PA.
Anisotropy of the fatigue properties in continuous cast AA5754 alloy sheet.
ASM Conference.
31. Liu, W.C., Zhai, T. and Morris, J.G. (2003, October). Comparison of recrystallization
and recrystallization textures in cold-rolled DC and CC AA 5182 aluminum
alloys. Materials Science and Engineering A. 358.1-2, 84-93.
32. Liu, J. and Morris, J.G. (2003, September). Communication: recrystallization textures
of continuous cast AA 3015 alloy: development of the P orientation {111}<566>.
Metallurgical and Materials Transactions A.34A.9, 2029-2032A.
33. Liu, W.C., Zhai, T., Man, C.S. and Morris, J.G. (2003, September). Quantification of
recrystallization texture evolution in cold rolled AA 5182 aluminum alloy.
Scripta Materialia. 49.6, 539-545.
34. Liu, J. and Morris, J.G. (2003, September 25). Macro-, micro- and mesotexture
evolutions of continuous cast and direct chill cast AA 3105 aluminum alloy
during cold rolling. Materials Science and Engineering A. 357.1-2, 277-296.
35. Wen, W. and Morris, J.G. (2003, August 15). An investigation of serrated yielding in
5000 series aluminum alloys. Materials Science and Engineering A. 354.1-2, 279-285.
36. Liu, J. and Morris, J.G. (2003, April). Texture and grain-boundary evolutions of
continuous cast and direct chill cast AA 5052 aluminum alloy during cold
rolling. Metallurgical and Materials Transactions a. 34A.4, 951-966A.
37. Liu, W.C., Li, Z., Zhai, T., Man, C.S. and Morris, J.G. (2003, March). San Diego, CA.
Development of through-thickness texture gradient during continuous cast
processing of AA 5052 aluminum alloy. Third Symposium on Hot Deformation of
Aluminum Alloys III as held at the TMS Annual Meeting. 125-134.
38. Liu, J., Cheng, X., Zhai, T. and Morris, J.G. (2003, March). San Diego, CA.
Recrystallization and texture of AA 5052 alloy during annealing. TMS Annual
Meeting: Automotive Alloys 2003, Increasing Energy Efficiency in Aluminum, and
Universities Servicing Education, Research and Technology Internationally for the
Aluminum and Light Metals Industries Symposia. 259-268.
39. Liu, W. C. and Morris, J.G. (2003). Comparing of the texture evolution in cold rolled
DC and SC AA5182 aluminum alloys. Materials Science and Engineering A. 339, 153-193.
40. Wen, X.Y., Zhai, T., Long, Z.D., Xiao, C.H. and Morris, J.G. (2003). San Diego, CA.
Evolutions of textures and particles of a continuous cast Al-Mg alloy during hot
rolling. Hot Deformation of Aluminum Alloys II, ed. Z. Jin et al. 421-431.
41. Liu, J., Cheng, X., Zhai, T., Morris, J.G. (2003). Microstructure and texture evolution of
Continuous cast and direct chill cast AA5052 aluminum alloy during annealing.
TMS Annual Meeting.
42. Liu, W.C. and Morris, J.G. (2003). Comparison of the texture evolution in cold rolled
DC and SC AA5182 aluminum alloys. Materials Science and Engineering, A339,
183-193.
43. Cheng, X and Morris, J.G. (2002). Tensile anisotropy of strip cast and direct chill cast
AA5182 alloy. Materials Science and Technology.
44. Liu, J., Zhai, T., Wen, X., Chen, J., Cheng, X., Liu, W. and Morris, J.G. (2002). Seattle, WA.
On the evolution of deformation texture of AA3105 DC and AA3015 SC aluminum
alloys during cold rolling. Materials Processing Fundamentals-II, TMS. 282.
45. Cheng, X.M., Das, S.K., Zhai, T., Yu, X.F. and Morris J.G. (2002). Investigation on
Mechanical anisotropy of strip cast (SC) aluminum alloy AA5182. Materials Science
Forum. 396-402, 1103-1108.
46. Yu, X.F., Zhai, T., Cheng, X.M., Wen, X.Y., Liu, J.T., Liu, W.C., Chen, J. and Morris, J.G.
(2002). Microstructure evolution and mechanical anisotropy of strip cast and direct
chill cast AA5182 aluminum alloy. Materials Science Forum. 396-402, 101-106.
47. Liu, W.C. and Morris, J.G. (2002). Kinetics of the formation of the B fiber rolling texture
In continuous cast AA 5xxx series aluminum alloys. Scripta Materialia. 47, 743-748.
48. Liu, W.C., Wen, X.Y., Zhai, T. and Morris, J.G. (2002). Seattle, WA. Texture evolution in
Cold rolled direct chill cast and continues cast AA1100 aluminum alloys. Aluminum
Sheet and Plate Rolling & Finishing Technology and Applications, ed. Skillingberg, M.H.
and Das, S.K., TMS, 211-218.
49. J. Li, Q. Zeng, X.Y.Wen and T. Zhai (2007). Microstructure, texture and mechanical properties
of continuous cast AA 5083 aluminium alloy. Materials Science and Technology A23-2,225-228.
50. J.X. Li, X.Y. Wen, C.S. Man and T. Zhai (2007). Fatigue of continuous cast AA5754 Al alloy sheet.
Materials Science and Technology A23-3, 324-332.
|
